Unitech MS335 Manuale Utente Scaricare il pdf (Pagina 38)

Scanner Configuration Manager

TROUBLE SHOOTING

Most problems that you might encounter with your scanner can be

solved by using the following procedures:

Test the scanner on other ports. Unitech scanners are built to

the highest standards, and a perceived scanner malfunction may

actually be a malfunction in the host computer.

Test the scanner on the host’s other ports if possible or, if neces-

sary, on other systems to verify that the problem is in the scanner

and not in the host computer.

•

Reset to factory default. While the SCM program is active,

click the “new file” icon (see page 1) and the “download to scan-

ner” icon (see page 1) to reset your scanner back to factory

default.

Please note that the factory default interface is specified as PS2/

AT/USB. If you have a different interface, then you will need to

configure that also (see page 4) and then download to the scan-

ner.

Caution: this procedure will erase special configurations that

you would have created.

•

Try scanning other bar codes. If your scanner can scan other

types of bar code symbologies, but cannot scan your bar codes,

first check to see if your bar code is enabled. If it is, try the

scanner on the same bar code type in the Bar Code Test Chart in

the back of this manual. Then, insure that your bar codes are

crisp and clear.

•

1 2 ... 33 34 35 36 37 38 39 40 41

Nessun commento

Unitech MS335 Manuale Utente Pagina 38